Code: 22028-4

Set 4 Trailer Hub Grease Seals E-Z Lube 3500 lbs Axle 22028

(9 customer reviews)


In stock

In stock


  • Fit most 3500 lbs EZ lube and regular axle hubs/drums
  • Double lip
  • 1.719″ ID, 2.565″ O.D.
  • Cross Ref.# 10-19/171255TB
  • 4 pcs included

Additional information



Trailer Hub & Drum




9 reviews for Set 4 Trailer Hub Grease Seals E-Z Lube 3500 lbs Axle 22028

  1. Ed

    Good price: They look like the same quality as the ones at Northern Tool and Tractor Supply for about 1/4 the price.

  2. Mr. Sixx

    Worked fine with my Dexter/Lippert 3500lb. axle: I repacked the 4 wheels on my camping trailer, and replaced the old grease seals with these. They fit fine. These are much cheaper than the Dexter, Lippert or Timken seals. I plan to repack the bearings once a year, so we’ll see if they last. I’ll update this review if there is a problem by next year, but I don’t anticipate any issues. Just do not use the E-Z lube zerk to pump the hub up with grease (unless it’s a boat trailer that goes in the water), or the seals will likely blow out and leak. Update 6/16/22: I repacked the bearings yesterday after 2 years. No grease leaks – these seals worked fine. I bought 8 more so I could replace the 4 old ones and have 4 more to spare. Good product. FYI – Dexter recommends coating the outside metal of the seal with Permatex RTV silicone sealant, I guess to prevent grease from leaking around the outside of the seal? I did not do that and didn’t have any problem with grease leakage.

  3. David M.

    Oem seals: Quality seals just like oem.

  4. richard t bow

    A: GOOD

  5. Larry Ganger

    Good quality seals.: I have had these seals on my RV axles for over 6000 miles. No problems. I believe they are made in China, but they are considerable less expensive than other seal I have found, but seem to be good quality seals. I would buy them again.

  6. Jonathan R. Adams

    Good value higher quality product but not elite level: Good value higher quality product but not elite level

  7. boraxo

    Fits perfectly: Works great.

  8. MarvPrins

    Fast/Good: Fast/Good

  9. John H

    Installed and working well: These worked perfectly, fit 3500lb dexter axle and hubs. Good quality, R&P Carriage offered excellent customer service and support.

Add a review