Code: 24051

2 Steel Trailer Light Boxes w/6″ LED Oval Tail Lights & 2″ LED Red Round Side Lights w/wire connectors 24051

(272 customer reviews)

$40.99

In stock

In stock

Description

Features:

  • High visibility SMD type LED, brighter & longer life than regular LED
  • DOT/SAE/STI approved
  • 12V
  • 2 pc sealed 6″ oval red high visibility 10 LED stop/turn/tail lights with grommets and plugs
  • 2 pc 2″ red round LED side mark clearance lights w/grommet and plug
  • High visibility SMD type LED, brighter & longer life than regular LED
  • 2 Pc heavy duty 14 gauge steel light boxes,
  • Steel light boxes dimension: 8-3/4″L X 4″H X 3-3/4″D
  • DOT/SAE/STI approved
  • 6 pc close end crimp wire connectors included

Additional information

Brand

LIBRA

Trailer Lights & Accessory

6" LED tail

T_SKU

24051

color

Red

Lens Size

6"

Shape

Oval

272 reviews for 2 Steel Trailer Light Boxes w/6″ LED Oval Tail Lights & 2″ LED Red Round Side Lights w/wire connectors 24051

  1. Kevin

    Amber lights don’t fit! Everything else was good.: Cons: Amber lights were too small for the circular opening side tail lights. Had to use black silicone to hold them in. Got excited and already welded the metal boxes onto the trailer before test fitting :). I tested the oval red and fit was good. Tested all lights were lighting up and started welding. Pros: all lights worked. Metal box felt strong and sturdy to roadway abuse. Wiring was easy to understand. Lights seemed to be made with good quality and materials.

  2. Mark Tillison

    I like them: The boxes arrived disassembled, the lights were protected in plastic bubble wrap, which I appreciate the extra care for shipping. I mounted mine on the neck of a gooseneck trailer that mainly hauls a tractor and hay equipment that usually blocks the factory tail lights. The boxes are made of stamped 14 gauge, which is stout enough to serve the purpose, without overkill. There are some sharp edges in the punched out light mounting holes, but nothing excessive, nothing 10 minutes of file work won’t cure. The ends are tack welded, IMO, well enough to work properly in a protected position. I opted to weld them up solid since they were going to be in an open area. I also added a 3/4” marker light to the back of the boxes, which is actually facing forward on the trailer. The boxes were coated in a cosmoline like anti rust film. It took me the better part of an hour to get them ready to paint, but they took rattle can primer and equipment enamel very well. The lights fit very well in the stamped holes. The rubber grommets were a little stiff, but a heat gun got them nice and limber. As far as some of the other reviews stating the lights were orange color or dim, mine ain’t. The ones I received are DOT approved and bright enough to leave you seeing spots. I feel like I got a hell of a deal. It would cost me close to double in the 903 if I had to start over from scratch building my own boxes and buying the lights. If you’re straddle of the fence on deciding wether or not to get yourself a pair, go ahead and get them. They’re well worth the money.

  3. Randy

    happy with the purchase: I like that they are encased in 14 gauge steel. They work good on my dump trailer

  4. D-wood

    Great light box for the money: The media could not be loaded. These are great priced and great quality trailer light boxes. The hole for the brake light could be a little bigger for the grommet to fit in. Had some issue with getting the brake light in without it pushing the whole grommet in. But played with it a little and fits good. The lights look good and was a straight forward install. I welded mine but they can easily have some holes drilled and simply bolted on.

  5. Clifton T.

    Beefy Strong Bright = YES!!!!: Product arrived on schedule, as advertised. Impressive! I don’t have the skills or tools to fabricate. I had my local professional shop weld them onto my utility trailer frame replacing the generic “bowl lights” originally outfitted. However, i did perform the intricacies of installing the lights and wiring – which really wasn’t bad, just not a wiring provided (length wise). Merged necessary connections with turn signal and brake light to get me out of the box into the main frame of trailer. B/c once boxes mounted to the frame, you have a small/tight internal space to figure out connections. Lights & silicone grommets weren’t as tough to insert as other users posted – maybe I lucked out on the cuts meeting dimensions. Achieved project results envisioned. 1000% improvement in all aspects.; Boxes are solid, rugged, and truly sturdy enough to stand on. More idiot proof, less potential/lower concern of me backing into something and smashing the bowl off. Honestly, surprised a hadn’t already done that, but considerably less concern now with the boxes. And lastly, the lights are 10 times brighter and more noticeable on the road promoting safety to drivers in my rear and backing into spaces. The added dimension of the side turn signal marker (circle) adds a nice aesthetic touch. Good Purchase!

  6. Tony Trevino

    Great quality: Right out of the box I knew these were well made with thick gauge steel. All the welds looked good and uniform. Lights are easy to install and are very bright. I bought them to replace my old, crappy square lights. I plan on buying another set for my other trailer

  7. Edward Lotak

    Very tough, almost indestructible…hold my beer.: I used my trailer for many different things but mostly hauling firewood from back in the woods. I was tired of replacing those plastic lights every time a rock or log shattered them, and occasional if I backed into a tree or branch. These are tough and if one of the lights get damaged (which I doubt will happen) you pop it out of the grommet, connect 3 wires and pop in the new one. It does come in bare steel so you will have to scuff and paint them so be aware of that. The through hole for the wires dont come with a grommet so you’ll need grommets or, if you’re using conduit you’ll need a threaded/female union to avoid chafing the harness. Lights are much brighter that incandescent. One thing to mention is the oval lights are directional. Not a big deal but if your ocd it will drive you crazy if you install one opposite of the other. You’ll see what I mean when you power it up. It’s like a smiley face pattern for the ruining lights so, one will be smiley and the other will frown. Good quality. If I have and problems I’ll update.

  8. M. Lopez

    solid light protectors: The cons first because they are few. There are no instructions, so a little electrical knowledge or youtube search savvy helpful. I also didn’t realize the outer edge grommets were removable. I tried in vain for quite a while to fit them in the slot with the lens in the grommet, obviously to no success. I read in comments and questions that they are two pieces, and fixed my issue. Again, no background in this so didn’t assume anything. I also followed others recommendations to file down edges before spray painting and installing. I drilled holes since I don’t weld and attached to existing flanges for lights. They match the frame nicely and look very solid. The lights are bright once I got the ground securely attached. Don’t push lens’ in the grommets until you test the lights to make sure all is good. It’s not so fun to pry them out. Once all lights are functioning as desired, push them in place. Took the trailer out to my field in the dark and they are very visible. I also added markers and the led bar in the rear center of the trailer. It was a well spent purchase and upgrade to my dimming old lights.

  9. J.wal-

    Cheap and strong: Can’t go wrong adding these box lights… weld them on and go! Used these on a customers trailer. Not going to say they are indestructible, but they have a lip sticking out to protect the light.. the light is in a rubber seal that has some give… just a great upgrade!

  10. BMW

    BEWARE buyer- these are not “ plug and play” you will have several hrs of prep and install time.: I have a 20 ft car trailer that has the light boxes like these installed as the Lowest point on the rear of the trailer, so they would drag over uneven road surface and have done so for years. I finally bashed one side so bad I couldn’t reinstall the light or grommet any longer. I bought these as replacement units and plan to mount them on the outside of the frame instead of underneath. When the boxes arrived, I opened them and the lights and boxes shipped, but no mounting screws were included. The boxes are unpainted raw metal with sharp edges and they have cutting oil all over them. There are only 4-6 tack welds holding the boxes together, so I plan to weld more to increase longevity and make them more durable. They will need to be prepped well with degreaser and metal etching before painting. I may have them powered coated instead. I will weld them to the trailer rather than trying to bolt them. Based on the pics and descriptions on the website, I expected mounting hardware to be included and powder-coated boxes. If you don’t have a welder and time/ materials to properly prep and finish coat these light boxes, buy something else.

  11. Christopher W Horn

    Great replacement to damaged ones: I was trying to straighten out an original in my trailer and then it dawned on me that they are most likely off the shelf. I was able to order these as they matched the originals. Much quicker and nicer to cut off the old one, weld this one on and rewire vs. the old smashed one. I had to drill a couple of extra holes for a ground screw and to mount the license plate light on this. “easy to install’ is only 3 stars as you need a welder. Not hard to weld one but not everyone has a welder. LED’s that come with this are very bright compared to the old bulb type lights.

  12. Matt A

    Very nice: I love these. Little overlap to protect the lights. They’re made of pretty thin steel, so I was glad to tuck it into the original light bracket on my trailer. Otherwise I probably would have added a section of angle steel to reinforce it. Installation will be heavily dependant on trailer design and your skills. These are not watertight. I opted to leave them that way so they can drain, then I painted them inside and out with POR15 to rust proof and used dielectric grease on the connections. But I considered using some seam sealer to seal it all up.

  13. Bill

    Good value for the $$: Works good and very good value

  14. BRANT R BETCHER

    Work: Metal is a little thin but they work well

  15. Brian Richards

    Four Stars: Very satisfied

  16. Larry Vandiver

    Welded on.: Welded on and working great years later>

  17. bigballer23

    Sweet: Great for a weld on application. Very happy with finally product.

  18. C. Huss

    Really nice light package: Heavy gauge steel. Strong enough to step on. Bright lights. Can’t beat the price. These enclosures with four lights only $10 more than one tail light from auto parts store. I always try to buy local first but this purchase was a no brainer.

  19. Mark Tillison

    I like them: The boxes arrived disassembled, the lights were protected in plastic bubble wrap, which I appreciate the extra care for shipping. I mounted mine on the neck of a gooseneck trailer that mainly hauls a tractor and hay equipment that usually blocks the factory tail lights. The boxes are made of stamped 14 gauge, which is stout enough to serve the purpose, without overkill. There are some sharp edges in the punched out light mounting holes, but nothing excessive, nothing 10 minutes of file work won’t cure. The ends are tack welded, IMO, well enough to work properly in a protected position. I opted to weld them up solid since they were going to be in an open area. I also added a 3/4” marker light to the back of the boxes, which is actually facing forward on the trailer. The boxes were coated in a cosmoline like anti rust film. It took me the better part of an hour to get them ready to paint, but they took rattle can primer and equipment enamel very well. The lights fit very well in the stamped holes. The rubber grommets were a little stiff, but a heat gun got them nice and limber. As far as some of the other reviews stating the lights were orange color or dim, mine ain’t. The ones I received are DOT approved and bright enough to leave you seeing spots. I feel like I got a hell of a deal. It would cost me close to double in the 903 if I had to start over from scratch building my own boxes and buying the lights. If you’re straddle of the fence on deciding wether or not to get yourself a pair, go ahead and get them. They’re well worth the money.

  20. Teddy

    Exactly What I Needed: Well made taillight assembly. Side and taillights with their respective gaskets fit precisely into the pre-cut holes in the boxes. The side lights were easy to insert into the gaskets. The taillights were difficult to insert as either the long top or bottom of the gasket kept folding in patricularly on the first one I put together. The second one was easier to insert. The steel box had plenty of room for the wiring connections (I use heat shrink marine butt connectors throughout). I attached the boxes to a rectangular frame of perforated angle that I attached with U-bolts to the roof rack of a car being towed behind an RV on a tow dolly. The 2 light boxes are mounted on the back of that frame with hex bolts and the assembled lights and frame are positioned as far back on the car’s roof as possible so as not to be hit by the rear hatch door of the car. The wiring is led to the front of the frame where there is a flat 4 wire trailer connector. An extension cable leads to a connection with the tow dolly’s wiring which in turn connects via a round 7 blade connector to the RV. I spray painted the boxes and perforated angle frame.

  21. D-wood

    Great light box for the money: The media could not be loaded.

     These are great priced and great quality trailer light boxes. The hole for the brake light could be a little bigger for the grommet to fit in. Had some issue with getting the brake light in without it pushing the whole grommet in. But played with it a little and fits good. The lights look good and was a straight forward install. I welded mine but they can easily have some holes drilled and simply bolted on.

  22. Randy

    happy with the purchase: I like that they are encased in 14 gauge steel. They work good on my dump trailer

  23. Edward Lotak

    Very tough, almost indestructible…hold my beer.: I used my trailer for many different things but mostly hauling firewood from back in the woods. I was tired of replacing those plastic lights every time a rock or log shattered them, and occasional if I backed into a tree or branch. These are tough and if one of the lights get damaged (which I doubt will happen) you pop it out of the grommet, connect 3 wires and pop in the new one. It does come in bare steel so you will have to scuff and paint them so be aware of that. The through hole for the wires dont come with a grommet so you’ll need grommets or, if you’re using conduit you’ll need a threaded/female union to avoid chafing the harness. Lights are much brighter that incandescent. One thing to mention is the oval lights are directional. Not a big deal but if your ocd it will drive you crazy if you install one opposite of the other. You’ll see what I mean when you power it up. It’s like a smiley face pattern for the ruining lights so, one will be smiley and the other will frown. Good quality. If I have and problems I’ll update.

  24. christoper

    Perfect: Welded on nice and they are alot stonger than i expected. After welding it in place i can use it as a step.

  25. M. Lopez

    solid light protectors: The cons first because they are few. There are no instructions, so a little electrical knowledge or youtube search savvy helpful. I also didn’t realize the outer edge grommets were removable. I tried in vain for quite a while to fit them in the slot with the lens in the grommet, obviously to no success. I read in comments and questions that they are two pieces, and fixed my issue. Again, no background in this so didn’t assume anything.

    I also followed others recommendations to file down edges before spray painting and installing. I drilled holes since I don’t weld and attached to existing flanges for lights. They match the frame nicely and look very solid. The lights are bright once I got the ground securely attached. Don’t push lens’ in the grommets until you test the lights to make sure all is good. It’s not so fun to pry them out. Once all lights are functioning as desired, push them in place. Took the trailer out to my field in the dark and they are very visible. I also added markers and the led bar in the rear center of the trailer. It was a well spent purchase and upgrade to my dimming old lights.

  26. Tony Trevino

    Great quality: Right out of the box I knew these were well made with thick gauge steel. All the welds looked good and uniform. Lights are easy to install and are very bright. I bought them to replace my old, crappy square lights. I plan on buying another set for my other trailer

  27. Christopher W Horn

    Great replacement to damaged ones: I was trying to straighten out an original in my trailer and then it dawned on me that they are most likely off the shelf. I was able to order these as they matched the originals. Much quicker and nicer to cut off the old one, weld this one on and rewire vs. the old smashed one.

    I had to drill a couple of extra holes for a ground screw and to mount the license plate light on this.

    “easy to install’ is only 3 stars as you need a welder. Not hard to weld one but not everyone has a welder.

    LED’s that come with this are very bright compared to the old bulb type lights.

  28. Matt A

    Very nice: I love these. Little overlap to protect the lights. They’re made of pretty thin steel, so I was glad to tuck it into the original light bracket on my trailer. Otherwise I probably would have added a section of angle steel to reinforce it. Installation will be heavily dependant on trailer design and your skills.

    These are not watertight. I opted to leave them that way so they can drain, then I painted them inside and out with POR15 to rust proof and used dielectric grease on the connections. But I considered using some seam sealer to seal it all up.

  29. J.wal-

    Cheap and strong: Can’t go wrong adding these box lights… weld them on and go!

    Used these on a customers trailer. Not going to say they are indestructible, but they have a lip sticking out to protect the light.. the light is in a rubber seal that has some give… just a great upgrade!

  30. Kingpelone

    Built strong and ready to mount: I was expecting Chinese tin for the money. I was beyond impressed when they arrived and I saw how well built they are.
    They have to be welded on, which I fully expected and am able to do.
    The LED lights included seem to be good quality and are bright. Wiring is standard and came with connectors. ( throw them away and solder the wires)
    Just beware, if you are not able to weld and do wiring, you will want to have them installed, but I assure you, once installed, they will probably out last your trailer.

  31. Ian

    Lights: It’s a good set of lights

  32. Dvs_one

    Rubbers in first.: The seals hold the lights tight. They come clean so welding is easy. I still cleaned them with some brake clean. Used some grommets to run the wires through and they look great.

  33. Christian

    The best lights you will ever buy!: we used to have problems keeping trailer lights attached and working, they live a very rough life getting towed around ATV’s on the farm. we were always smashing them into stumps and rocks, but these lights solved that problem!. ever since I welded the first pair on I have had 0 problems even after hitting a few rocks. I highly recommend them, I welded mine on but you could drill a hole and use a bolt. I also recommend running a wire that has 3 separate strands such as this one https://www.LIBRA.com/gp/product/B01MR8BKVZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1. The largest benefit of doing this is you eliminate your grounding problems since you will no longer be using the trailer as the ground. I’ve done this to all my trailers and have yet to have a problem.

  34. kaleb Hampton

    Works: Wirks

  35. Debra Daniel

    Good product: Easy to install work great

  36. Tilly

    lights come unpainted: No where in the description does it say they arrive unpainted. Would have been helpful and good to know, other than that Great lights, Easy to install

  37. KEVIN JORDAN

    rusted 3 mo after installed setting in weather: need to paint rusted right away

  38. Ross Zahara

    Never Buy CHEAP Plastic trailer lights: I have a couple trailers and ive Replaced the Lights Many times just due to something bumping into them and Breaking them off or smashing them all together. These LED Lights are a Game changer the Steel is actually ALOT thicker then i Expected you can actually use them as a Step its so thick. The price difference is not that much compared to the Chinese Plastic light kits which will either break or fall off. These are TOUGH. but installing the LED Lens is TOUGH and its a TIGHT fit i used silicone lubricant witch helps. so far the best Band for the Buck for trailer lights.

  39. Timothy L

    Have not gotten them install Yet But overall They look good: From just a quick look They look well built The housings are not fully welded therefore not waterproof Unfortunately what I did take my power probe and test all the lights all the lights work For the money considering you get led lights and the housings If you need them both I think it is a good deal

  40. Sam Roberts

    Strong and well made.: These are strong, well made and fit my needs perfect. I welded them to the bumper of a camper that had bad electrical problems. For those who have asked, these are truck lights with a 3 wire pig tail fpr the 6 inch oval and a 2 wire pig tail for the side marker. The red wire is stop/turn signal, back is running/clearence lights, and white is ground. So on a flat 4 wire harness, green and yelow go to red on respective sides, brown goes to the black, and white goes to the frame. I added a white plate light to the top by drilling three holes, and conecting the black wire to the brown harness wire.

    The grommets for the 6 inch lights are verry tight. Using WD-40 on the edge of the light helps a lot when pushing the light into the grommet and will not harm a thing.

  41. William D. Risen

    Indestructible: Quit asking so much about the boxes. If you want a review ley me decide what I want to say.

  42. Ryan & Kayla Michael

    Great Product!: Great product and would definitely recommend for someone looking for sturdy lights to weld a box to their trailer.

  43. Bridgett Shequen

    Trailer light covers: Already bumped one and broke it. Was fast and easy to install.

  44. James T. Zapetis

    Heavy duty: Bought these after replacing trailer lights TOOOO many times. Drilled and bolted to frame, then decided to run a weld bead as added sturdiness. The long LED was tricky to mount in the opening as the rubber/plastic grommet kept rolling inward. Some light “adjusting” with needle nose pliers got the grommet into place.

    Future design “wish list” would be a plate lamp added on bottom of one unit. And perhaps a grommet or wire clamp for the feed wiring so it won’t chafe of the opening.

  45. NobetterthanU

    Strong Light Housings: I installed these in place of the original lights that were too easily broken on my utility trailer. These housings are heavy duty, really strong. and well made. These work great for the LED lights. You can weld or bolt them in place. I bolted mine on and they work just fine. Some reviewers remarked about sharp edges and welding because they’re spot welded. That’s easily remedied and is really not an issue with me. These are strong enough to stand on if mounted correctly. The edges are easily smoothed with a file and apply some metal window or door sealant to seal any openings. They are just what I needed and a fair price.

  46. Gary H.

    Good deal: If you don’t have a welder these may not be for you. They only have a couple of small welds holding the box together and need a few more to make them solid. Other wise they are well made and the lights are nice. For the price you can’t beat them.

  47. Speedy

    Very tough lights: I bought these to replace plastic lights on a small tilt bed trailer that were always breaking. I decided to weld these on and am very happy with them. The LEDs are bright and the housing is thick enough metal to hold up to moderate abuse.

  48. Jinx 151

    They were heavy duty: The lights were more substantial than I thought they would be and the price was really good. I’m very happy that I bought these and I used them on my utility trailer. Thanks for a nice product.

  49. Chris

    Definitely worth the price!: It’s nice when you can have your expectations exceeded the minuet you open the box. I was wary when I ordered these because of the price. I was looking at spending three times as much to get this setup at the local parts store. So, I thought these were going to be real thin metal. They are actual nice and thick. My best guess is about 14 gauge or the thickness of a Nickel. They are spot welded and not a continuous weld but for my application that is preferred. All in all, well worth the price!

  50. Welder mom

    Quality piece made from 14ga steel: Although this is a quality product I wish it were made of 10 ga not 14ga works great and welded on fine .I just know it will get bent up by my guys

  51. Travis Costanza

    Nice addition: Only thing it should have included is a grommet for the wires to enter them.

  52. David Fox

    Well built, worth the money, nice welds: For the money, these are very good units. I appreciate that the marker lights are amber instead of red to match the other lights on my trailer. You will need to weld them up all the way, and they may warp a bit when you do so, but other than that, relatively straightforward. Would highly recommend.

  53. M C.

    packed good, product from good part of china.: not bad for china crap, from the better part of china.

  54. Lost Pathfinder

    Works great: So These lights are pretty good. My only complaint is there is a hole were the wires are fed inside and there is no rubber grommet to ensure it is water tight (hence the one star removed). Very thick metal. ALMOST too thick!! I mounted these on top of the original mounting bar on my trailer. No reason other than it made the lights higher up.

  55. skyler

    Might consider adding a few welds to this.: great product for the price, but if you are anything like me, you will want to put some more welds on it.

  56. Douglas Johnson

    Quality product: Damn nice product for the money all four lights work as they should minnesota winters require a decent light box and I believe these will measure up

  57. Tommy J.

    This are heavy duty housing. Just what I needed: These are great! All the lights fit well and the housing bolted to my trailer. Just had to drill the holes, but with my drill press it was a piece of cake.

    I am very happy this this purchase

  58. gsmith9308

    Trailer Improvement for Sure: Product was exactly as described. However it was well oiled. I suggest washing in your dishwasher and then spray painting when dry. There is a good utube video with good hints on installation.

  59. Ben

    Steel Box Trailer Lights.: Only thing that I didn’t care for with these is they are bare metal and need to be painted or powder coated.

  60. russell sidebottom

    very rugged lights: i needed a good tail light box for my dump trailer. others just kept breaking and bending with the slightest “bump”

  61. User

    Good value: Excellent product. Easy installation and for a great price too.

  62. James Rossi

    Works and looks good: What an easy way to replace the lights I was tired of fixing the ones that got hit or smashed or something happened to them nice and bright and easy to install looks good on the trailer. Very happy with the product

  63. troy

    Heavy duty: Very heavy duty light boxes. I did do some cleanup on the edges as some were quite sharp. I bolted these on rather than welding, as they are on an off road trailer. I needed to buy a license plate light as there is no option for one on these.

  64. Marc J. Ciechoski

    Heavy duty trailer lights: These lights and boxes are great. My trailer like everyone else’s had the cheap plastic lights that you can get a pair for $15 well I can’t tell you how many of those I’ve broken or someone using my trailer have broken. These lights are heavy duty and the same style you would see on a tractor trailer.

  65. Eric Wiseman

    Just as described: After 13 years my trailer needed new wiring and lights. Purchased these to replace the trailer lights I kept breaking off. So far after 2 months being on the trailer, they are holding up great!

  66. Steve Riley

    Great!: These lights are great. I ended up getting them welded on, although you could also bolt them on. I got them wired up and painted now, as these are just bare metal. The lights work great and look great. And the best news is, these won’t break all the time like those cheap plastic ones. I’d be unloading firewood, and a piece would bounce back onto one of the cheap plastic ones and just destroy it. That won’t be possible with these. I’m very happy.

  67. brother moe

    still needs a bit of work: I added some extra welds, as it is only tack welded in a few places. I also had to drill a couple extra holes to mount for my particular application. I would and probably will order another set for my other trailer. They work great and are very bright. I use them on my boat trailer, so I needed submersible lights and these fit the bill! they will need paint or powder coat, so keep that in mind. the gaskets were a pain to get in there, and worse when I had to remove it because i forgot to connect the wires.

  68. Brandon

    Great for the price!: The metal light box where very well made. Welded boxes to my trailer and then painted. Wired lights to trailer wiring harness. Looks very professional!

  69. Hi Desert

    Unbreakable so far!: Have these on a vehicle and a trailer. They were both getting their plastic taillights smashed on a regular basis, but no more. These things are well-made, and tough. I added a few more welds, which was a quick and easy upgrade, because I know how rough my guys are on stuff. Wiring was easy, the lights and grommets fit perfectly. I’ll never buy another taillight of a different type.

  70. amy K

    Works. Great light boxes: Works great. Installed on a boat trailer we rebuilt.

  71. Tom Bauman

    Good value for your money.: They’re perfect for what I needed. Good quality, fast shipping, great price!!

  72. Dr. Awesome

    so good. Replaced the plastic junk that cracked on my …: So far, so good. Replaced the plastic junk that cracked on my trailer. I welded them more than the tack welds that held them together, but most people do since you weld them onto the trailer anyway. Now I can get back to work crashing into stuff with my trailer.

  73. Steven H.

    You need to weld them on: The steel is thick the lights are nice come with the pigtails
    The box is only spot welded and needs painted inside and out I used silicone To seal them up over all I think they are a good deal

  74. Bill Turner

    Heavy Duty: The only dislike was that I had to paint the housings.

  75. Joe

    Unfinished product: It’s only tacked together have to weld it together the rest the way

  76. Hugh A

    Well made!: These lights and housings worked out great! I bolted them on in place of a worn out set. I didn’t weld up the gaps. I painted them in and out with bedliner paint, wired them up, and they worked great. Make sure you have a good ground or they will work erratically.

  77. Boris

    Great light housings and lights: I wanted something more durable for my utility trailer. These have completely met my needs. They were bare metal that was not completely welded so I welded up the gaps then put a very thick coat of paint on the inside and outside. They look great and can see how these lights will last a very long time.

  78. Britt Davis

    Great addition to any trailer.: The media could not be loaded.

     Welded them on and added paint. Super bright and strong. #CUMN8TR

  79. Customer1

    Great buy!: Very durable and well built

  80. Sean

    Great lights for your$$$: Needed to weld them to the trailer I put them one. Heavy duty don’t think they will get broke like all the others I put on it

  81. bob owen

    LIGHTS: THEY WORK GREAT

  82. Lynn

    Worked great: Worked great

  83. Jenell B.

    Exactly what he wanted: Boyfriend wanted trailer lights he is happy

  84. Taco

    Marker lights were not described.: The side marker LEDs that I received are not what were described. Described are 9 LED marker lights. The ones I received have 4 LEDs. I will buy replacements elsewhere. The only other thing is that I wish the boxes were fully welded rather than just tacked together. Other than that they look great and will be a great addition to the trailer.

  85. bowtie63 chevy

    Very happy with product: Lights and boxes were well packaged, Good quality and arrived a day early.

  86. Andy

    Perfect replacement lights: This was the perfect way to replace the cheap plastic lights that came on my trailer. I welded them right on to the old bracket. My only critique to the manufacurer is the wire tails could be a bit (maybe 2inches) longer.

  87. jesse moran

    Good buy: These light buckets for really nice not fully welded but for a sealed beam light bulb they are going to work just fine have to weld them on to the side of the frame and run wires through the frame into the box but other than that they’re great looking light fixture

  88. TINKERBELL

    GREAT: I WOULD RECOMMEND THIS PRODUCT.

  89. Tavoris levy

    Must be able to weld: Great product!

  90. JLO

    Light: the Housing is built with steel and needs to be painted , it is a good build and lights are great

  91. Randy

    Solid Housing and Lights!: These are a great value over the cheap plastic lights that get knocked off with one bump. These can be bolted on or welded. It takes some preparation, but in the end, it’s worth it.

  92. B. Arnold

    Very durable, greatly reduces accidental broken lens.: These light boxes are very durable, although they require some work to install. I welded mine on. It helps to spray paint the insides before installing.

  93. William Knapp

    No installation instructions included. Heavy duty frame and grommets around lights.: Like the strength, using it for a tiny home build.

  94. beth h.

    Nice units!: These lights were purchased to replace existing trailer lights. The boxes are well made and will offer lots of protection for the plastic lights. I’m very pleased with this purchase!

  95. paul

    heavy duty light box: work and fit great very sturdy . could not buy materials for this price lights alone are $35 . you will have to weld to completely seal them but takes 5 mins to do.

  96. Tracy blacksmith

    Nothing: Excellent

  97. ALM

    Lights: Heavy construction box works well, the rubber grommets don’t seam to work very good

  98. Shopgopher43

    Definite upgrade over plastic trailer lights.: Heavily built, bright.

  99. Raymond Filoteo

    Oo: Product was good easy to install welded my on lights worked great

  100. Timothy Durbin

    Great long-lasting lights: I use these on every trailer I can. The oldest said I have is over 4 years old now still going strong.

  101. Greg McCormack

    Fun Project!: Out of box…first thing take off sharp edges. Clean with mineral spirits. Needs painted, wired, holes drilled, if that your mounting style. Lamps work great…very bright. Fun project! Glad I’m done with POC square fall apart lights.

  102. Rocket Rob

    Rocket Rob gives thumbs up: Easy weld on. Quality product.

  103. jacob

    Decent: I liked the light boxes but the grommets not so much

  104. Francisco

    Not good: One of them stoped working after a month

  105. Steven stamper

    Heavy duty.: Just as describe, heavy duty. Works great.

  106. John A Murphy

    Like!: Little tough getting the rubber grommets to get back in place, but they work well and should be hard to bust. Metal overlaps the lens.

  107. leonard rudnicki

    They are exactly as pictured: I bought these lights for my trailer I haven’t had the time to install them yet with that being said they are everything I expected very well built heavy-duty yes I would recommend

  108. Will

    Trailer light boxes: Wasn’t to bad to install. I rounded all the sharp corners off. Made some holes to mount. And primed and painted before installing on trailer. They look great.

  109. William K.

    Steel and a steal.: LED Lights are included, so it is a steal. The metal is sturdy, and there was no rust.

  110. JimmyM

    Very good price for these LED lights: Very good price for these LED lights. So much better than those damn plastic light the break if you look at them cross-eyed. Easy install, drilled a few holes, soldered a few wires, and done. No markings on wires so make sure you check polarities before install.

  111. JoJo

    Well made: Well made with a good price.
    ⭐⭐⭐⭐🌟

  112. John Masterson

    Great value: The lights were as advertised and delivered promptly

  113. K. Betts

    No more broke lights!: They arrived unpainted and I wish they had been powder coated. Welds were ok. Primed the metal and painted it. Looks great and made a big difference on the trailer. No more broken lights from backing into stuff ever. Woo, wooo!

  114. carlos

    Excellent: The media could not be loaded.

     It’s a small project, but great price for the quality.

  115. steve O

    I can’t tell you how great they are: I’ve ordered several of these. I can’t tell you how great they are. The price is amazing for a well made box and lights. You can bolt them or weld them on. Put them on your trailer!!!

  116. HOTROD

    perfect: quality made

  117. JN

    Sharp Edges!: These are excellent, however the edges are razor sharp!!!!! be sure to file or grind down the edges before you tangle with it.

  118. Todd Bilski

    Super bright: Well constructed, they dont come painted so you can paint them to match your trailer. Super. Right and easy to install. Well worth the money.

  119. ivan

    Awesome: Well build, they look thin but a soon I welded did a test and got on top of them, no bent or cracks(I’m 300lb)

  120. Custom Fabricators & Repair

    Easy and Cheap!!!!: Saved us from having to make this from scratch. There is no way we could buy the lights and make the housing for the $45

  121. Mike algeri

    Great!!!: Lights are very sturdy, bright and easy to wire in great buy!!!

  122. liz davis

    Supper easy well built: Only grip not fully welded end caps not sure why only talk welds very well built heavy gauge steel

  123. Jacob L.

    great stuff: very solid built with very bright lights

  124. myrna vancleave

    trailer lights: This is what our Grandson wanted for Christmas. It sure is made goo & heavy

  125. JR StCroix

    These are amazing.: I purchased these for a trailer I was building for my son. I could not make them for what they are charging for them… Highly recommend them!!

  126. DRB

    HAPPY HAPPY HAPPY: Bright, look good, and no more wasting time and money replacing busted cheep plastic trailer lights.

  127. JJ

    Good light housing for the price: Good light housing for the price. Tact welds were broken like others said. But only took a minute to fix while welding them to the trailer frame. Would definitely buy again

  128. Angela Cleary

    Don’t repair your broken lights… replace with …: Don’t repair your broken lights… replace with these and you’ll only have to replace the blind when it’s time. No more broken lens when “someone” didn’t see that dip in the road or that tight corner

  129. shiney

    Great product: My husband purchased these for our new equipment trailer for our business. These lights set the trailer off and work great.

  130. woodmech

    Good product: Very hard to install the lights into the metal can

  131. BRANT R BETCHER

    GREAT light output: built well. GREAT light output. used this also as a wiring point for rear of trailer. i solder everything and also heatshrink, silicone, however its nice to keep connections out of the elements.

  132. Don McCormick

    Well Built: These lights boxes are extremely well built and come complete with lights for a great value.

  133. Wesley Combs

    Solid tail light mounts: Worked well. Way faster than Fabricating the enclosures myself

  134. JRL

    Weld on and paint looks great: Very good quality works great just weld on and paint

  135. Frank Clason

    It protects the light hopefully from getting broke: I like the light being in close in a steel box not so easy to get broke out

  136. Thaddeus D. Holdinghausen

    built to last the life of the trailer: BEEFY! stop bying those cheap lights at auto part stores! I don’t know about you, but i’m tired of replacing broken tail lights.

  137. Internet Shopper

    Very Bright, Very Tough and Durable.: These are great. Super bright lights, tough tough steel. I used to break the old cheap plastic ones all the time. Now I finally got some good ones that will last. The only con I have is that It would be nice it they were powder coated or at least painted, but I rattle canned them a few coats.

  138. bobkat442

    heavy duty and look good: I am putting these lights on my flatbed trailer and they should fit just right .
    they are heavy duty and look good

  139. MrsC

    Awesome value!: Very nice quality for the $! Comes as bare weldable steel so be prepared to paint.

  140. david gogo

    keeps connections out of weather: these things are neat, look good protect lights and keep connections from weather.. Love em…

  141. Steve

    Nice set up: Very nice kit. Comes with everything you need. 3rd set I’ve ordered. Fast shipping arrived earlier than expected.

  142. Bradley

    … 16′ trailer that I re-wired and this is the best way to go: I Mounted these in my 16′ trailer that I re-wired and this is the best way to go. Now the lights don’t get hit or accidentally broken from backing into tight places!!! I love them!!!

  143. Billy Ray

    Matched perfectly.: These worked out great! Welded into place and worked perfectly.

  144. Daniel Castaneda

    Easy to install: This light working great for my trailer

  145. Joshua L Johnson

    Really nice product. These were much heavier duty then I …: Really nice product. These were much heavier duty then I thought. Nice clean straight edges. Lights fit I. Very well. Couldn’t ask for better.

  146. Mark L.

    Made of steel , not plastic 👍: They make them easy to install, just a little welding.

  147. Charlotte M. Durham

    Great service and delivery: Great product

  148. From galt ca

    Led: Love em no more broken tail lights

  149. Will Wilson

    Great: Exactly what I needed

  150. Chris Merrow

    great lights: easy install super bright

  151. Erik

    Nice little boxes to upgrade my utility trailer: Nice little boxes to upgrade my utility trailer. The metal took the welding and painting well and the lights are a nice fit and look.

  152. C

    Great product: These lights are great! They are very durable and easy to install.

  153. Dennis R Bray

    Very fast delivery: Product was just as advertised

  154. ronald moorhead

    Great led box lights: Great led box lights

  155. masterchiefdavis

    tuff-stuff: brilliant,super bright light, strong housing,use calking to make watertight,

  156. Jerre P

    Quality: Very well made. Great light visibility.

  157. Cory B. Guerrant

    Great product: Great product

  158. Conall Stapleton

    Good part: Good part…good service

  159. Clint Weber

    Five Stars: These are the best trailer lights I have every owned heavy duty steel housing and super bright lights

  160. Rickybaw

    Perfect for my trailer but as others pointed out: Perfect for my trailer but as others pointed out, make sure to paint them first or they will rust like crazy.

  161. Luke Swanson

    Good Quality: Received them Fast! Exactly what I needed!

  162. Chad S.

    Unbeatable price for heavy duty box and lights.: Unbeatable price for heavy duty box and lights.
    Tip to put in front oblong lights first and then the side marker lights last

  163. Ronjon

    Happy buyer: Everything was as described, everything fit perfect on the trailer happy buyer!

  164. mike williamson

    Easy to use: As promised

  165. Alvin Hall

    Looks great: Best lights for trailers no more blown bulbs

  166. Brian

    These were exactly like described: Worked wonderfully

  167. lance

    easy install: this what i was looking for

  168. Rrt

    Gooddeal: Good deal

  169. Tina

    Wow very heavy duty: Nice heavy gauge metal. Very impressed!

  170. paul doherty

    Lights seem to be good. Just mounted them on a trailer ( welded) …: Lights seem to be good. Just mounted them on a trailer ( welded) easy install. Easy wiring. Could be made a little slimmer if they had used 3/4″ side marker lights.

  171. Jon

    Perfect: Perfect

  172. MS CCA

    Well built!!!: Extremely high quality. Easy to weld and wire.

  173. Zak

    👍: Thumbs up

  174. joann

    Sturdy!: Very satisfied with this product. Functional and looks great.

  175. Valerie Hrabak

    Good Product: nice and sturdy

  176. Rick Weaver

    AAA seller: excellent product

  177. Swift

    Great update to a older trailer!!: Great upgrade from my old lights

  178. Steven Taylor Jr.

    product was as described: product was as described

  179. robert baker

    well made and easy: Just what i needed, well made and easy install

  180. Ron Batchelder Jr

    Works: Looks great bolted up to my trailer!

  181. Alexander T. Niven

    Awesome lights: Box protrudes out to protect the lights

  182. Charles L Ryan

    A+++: Works great

  183. Elizabeth Lewis

    Five Stars: Worked perfect, cut outs are a nice tight fit, unbelievable price

  184. Me

    Good: Nice

  185. jeremy combs

    Good product: Nice boxes as expected

  186. bluecamogirl

    Protects The Lights: Well made and looks sharp.

  187. Dean with the Machines

    Five Stars: Works perfect, easy to install

  188. Christopher Young

    Great deal: Good product..

  189. Madmac8005

    Five Stars: Great light boxes very satisfied with them just paint em and your good

  190. movnrn

    Five Stars: Dresses up my trailer nicely.

  191. Larry Cason

    Five Stars: Nice set up.

  192. BSH

    Quality at a good price: Excellent

  193. Donny Caminos

    Great work: Perfect for my needs
    Great work

  194. David Pickrell

    Five Stars: Great buy for what you get

  195. Thomas Radwanski

    Five Stars: Wow! Solid and well built.

  196. Michael Roth

    Very nice!: These are really heavy duty! I’m very happy with.

  197. brett culver

    Four Stars: these are great i won’t be breaking these lights any more,very bright leds

  198. Josh

    Five Stars: Very nice. Worked great.

  199. MJD

    Five Stars: These lights are sweet. I’ve replaced several of the cheep ones and finally bought these

  200. TIMOTHY LALONDE

    Five Stars: Works great, but expected them to be painted or power coated and they aren’t .

  201. Troy

    Would buy again and have recommended to several friends: Very well built. Would buy again and have recommended to several friends. Very happy.

  202. Greg Klebs

    Five Stars: Awsome

  203. Gene

    Five Stars: Great product

  204. Erth Truth

    Blink blink!: Lights work GREAT. Frame/box is also very nicely made.

  205. Mike Z

    Five Stars: Worked great just as discribed

  206. Walter J. Bargen

    Five Stars: Great design and structure!

  207. Brian Richards

    Five Stars: Work great

  208. ALLAN NYSTROM

    Five Stars: SO NICE AND EASY

  209. Dylan Thompson

    Very good quality, easy to use if you have basic tools, no welder needed: The media could not be loaded.

     Really well made! I was hesitant, just follow your basic wiring diagram with old wiring. (YouTube videos on 3 wire trailer lighting) You will need to either drill holes and bolt on which I did or weld. Also you should prime and paint these, I used rustoleum primer and glossy black paint. Very good quality, a couple tips 1. The rubber grommet that houses the lights should be inserted first and then firmly press the light into the housing. 2. Leave extra working length of wiring to work with. 2. Use other wire connectors than what the packaging gives you to get a good for, grip.

  210. Yeah its me

    Just what I was looking for: Just what I was looking for. Great product.

  211. Marsh311

    Mounting: What’s the preferred method of mounting? Welding?

  212. brian

    If you can weld it’s a breeze.: These are sturdy, LED and durable. Only problem is the boxes need a little sealing at the joints. Not a huge deal, a little silicone and then painted. But man theyre sturdy. I have 2 sets on 2 trailers and where they’re mounted they get Walked on. Very durable. Recommend.

  213. Lisa

    Wow these are great: These was better than I was expecting them to be

  214. Robert Johnson

    Love them: Good product

  215. Gioturfman

    Very durable light fixture: Well constructed and lights sealed up. Had to paint the color to match trailer.

  216. Dennis

    Good price, better than average quality: Light boxes were welded on trailer, painted and lights installed, plugged into harness work as should

  217. Barbarella

    Good for the price: Easy to install, quick delivery and good value.

  218. Alma

    Great price: I’m installing these on my trailer. I broke the ones I put on without the box, hopefully they will last longer

  219. Kindle Customer

    Best investment!: Have had them on my trailer for a couple years and have been great!

  220. Willylaboy

    Sturdy: What more to say. Sturdy and no more busted lights

  221. Randy p.

    Good price for a tough tailight housing.: Will last forever!

  222. BigHazzard

    I have 3 sets now on my boat and my 2 utility trailers: I have 3 sets now on my boat and my 2 utility trailers

  223. GrimmRoper

    Highly recommended!: These trailer lights are amazing. They come in a fully encased metal frame which will protect the lights from rocks and other things that get flipped into the trailer while driving. I also like the fact the metal comes bare so I was able to paint them to match my trailer. All in all this is a great set of lights, and the price is right on the money for all you get.

  224. Abidehandy

    Prety sturdy enclosures. Happy with purchase: I welded these units unto my trailer, i was happy with the price. I did do additional welding all around since the are only tap welded and to make sure they hold up I sealed all the gaps with welding. Could not have made them myself, they are very sturdy metal, will be able to handle any abuse without damaging them.

  225. Bellworx

    Very well built. Tack welded: I am always hitting my legs on my car hauler trailer lights. I cut them off. I am actually going to install these on the rear of my fenders on top of the step that attaches to the fender. These are tack welded together. I may add more weld to ensure these don’t fall apart. So far they seem well built. These are not painted btw. Just raw steel. I will post pics later.

  226. Steven

    GREAT BUY: The cost efficiency of this pair of lights amd boxes is what attracted me to the product. As I expected, the products came in the mail unscathed. The lights were packaged in bubble wrap imside the steel box to prevent scratching. It comes with six bell style connectors, and I crimped those and put hest shrink on them. The lights are nice and bright when hooked and grounded correctly. I grounded mine with self-tapping screws drilled into a round bolt connector on the wire, then drilled right into the light box. Maybe not the best, but it’s nive bare metal, and still grounds well painted. The whole light is not visible because of the tailgate on the trailer. They compensate in brightness. I welded them to the angle for the original lights. I should have contemplated that, but I was too excited to get them on and working. Nice price, nice lights, and nice boxes.

  227. L. Lee Albright

    Good deal: Good deal

  228. JoMomma

    nice product: quality steel but bare no primer or paint

  229. david w.

    Lights dont fit box properly.: Quality of the boxes and lights are great value for the money but the lights do not fit properly in the box. I’m ordering a different set of lights to go in the boxes with a screw on gasket/grommet. Hopefully new ones will fit properly.

  230. David M.

    A little tough to get the lights into the housing but I figured it out.: A set of directions on light insertion would have been nice. But I got it figured out. Well made housing, I was going to make a steel housing to protect the lights, (lots of gravel roads) found these and now they are on the trailer. Perfect!

  231. You Michael Pizza

    Wish I purchased these years ago!: I read a lot of good reviews and a few bad. I installed them today took about 4 hours. I bolted them in place of the original holes in frame. Cleaned and painted them. Look great very bright . Never again will I replace those plastic junk ones that break.

  232. Brandon

    Beefy + Strong + Bright = YES!!!!: Product arrived on schedule, as advertised. Impressive! I don’t have the skills or tools to fabricate. I had my local professional shop weld them onto my utility trailer frame replacing the generic “bowl lights” originally outfitted. However, i did perform the intricacies of installing the lights and wiring – which really wasn’t bad, just not a wiring provided (length wise). Merged necessary connections with turn signal and brake light to get me out of the box into the main frame of trailer. B/c once boxes mounted to the frame, you have a small/tight internal space to figure out connections. Lights & silicone grommets weren’t as tough to insert as other users posted – maybe I lucked out on the cuts meeting dimensions. Achieved project results envisioned. 1000% improvement in all aspects.; Boxes are solid, rugged, and truly sturdy enough to stand on. More idiot proof, less potential/lower concern of me backing into something and smashing the bowl off. Honestly, surprised a hadn’t already done that, but considerably less concern now with the boxes. And lastly, the lights are 10 times brighter and more noticeable on the road promoting safety to drivers in my rear and backing into spaces. The added dimension of the side turn signal marker (circle) adds a nice aesthetic touch. Good Purchase!

  233. bob owen

    Quality product: Very well built and easy to install

  234. bob owen

    Well constucted and good quality: I ordered these light boxes to install on my trailer a little higher than the ones that are on there. I was impressed when I got them. They were good quality built boxes and everything I needed came with them. It included the rear LED stop and tail light fixtures, the side LED light fixtures, and the wire pig tails to plug into all of the light fixtures.

  235. Boris

    Great Trailer Lights: Easy to install. Great design in meaning an object will hit the metal box before it hits the light. That’s how I’ve lost all my other trailer lights, backing into something and them breaking off. Now the lights are protected. Should have done this years ago. I recommend buying them.

  236. Brandon

    Works very good: On the boat trailer

  237. Brandon

    Good.:

  238. Bridgett Shequen

    they are easy to see and the lights work great: the boxes are very well made, i have used four so far, i welded them to my trailers, they are easy to see and the lights work great, they are a very good addition to my trailers, i sanded them down and painted them to match the trailer colors, i am very satisfied with the boxes and the lights and the price, i will be re-ordering more later, i own several trailers and i am eventually going to add these to all my trailers.

  239. BRANT R BETCHER

    My friend’s: Purchased for my friend n he said it was great!

  240. Britt Davis

    for the money you cant beat it: Nice set up. I would like to have a pair made of 3/16 or 1/4 for heavier trailers but these work fine on smaller ones

  241. beth h.

    Bright lights: Had to drill some holes, but fit good, painted and caulked hole for wiring, I like the look

  242. Brian

    Totally worth it.: Solid. Easy install. Good product.

  243. bobkat442

    Great up LED grade!: Great coustomer service, lights I ordered to repair my trailer were exact that are pictured and perfect upgrade . Would definitely recomendable!

  244. Brian

    rear pkup rack, lites boxs: Install on my pkup head ache bed rack,,behind rear window. Work great, just add, paint, looks like factory, save 200 to 300.00$ cost, on my head ache rack, by install my own lites. Wire into ur trl lite plug,

  245. Britt Davis

    Fast delivery, quality product.: I have purchased a couple of these sets. Just got my third set today. As usual, the quality is nothing short of outstanding.

  246. BSH

    Very Robust: Great product

  247. BRANT R BETCHER

    Great value and very well constructed.: These units are perfect for upgrading your trailers lighting. Purchased for a 8×10 utility trailer.

  248. Bradley

    Nicr: Nice

  249. bobkat442

    Five Stars: Look great, wish the steel was a little thicker but work good

  250. bluecamogirl

    Good buy.: Good quality very happy with this product.

  251. Billy Ray

    One of the best set of lights for the money: One of the best set of lights for the money

  252. BigHazzard

    Great Product: Great Product

  253. BRANT R BETCHER

    Five Stars: These are a very good product and worked well for my application.

  254. brett culver

    very good quality, lights are brite: Well worth the cost, very good quality, lights are brite. Can’t go wrong with these.

  255. Brian

    Five Stars: These are very high quality lights and boxes and I’m very impressed.

  256. Brian carson

    Five Stars: Perfect just what I was looking for!!

Add a review